Bridjit driveway curb ramp Center Piece (ONLY) for the extension of your Birdjit Ramp. Corvette ramps for protection of the undercarriage of vehicles from damage when driving over rolled curbs

Additional 4 ft. sections can be added as needed to accommodate the length of your driveway. Also available: Standard 3 sections set for 12 ft driveways, 4 sections for 16 ft, and 5 sections set for 20 ft driveways.

Birdjit Corvette Ramps is the BEST rubber curb ramp for protection of the undercarriage of vehicles from damage when driving over rolled curbs. Great for vehicles who's front bumper is too low to clear the curb from the street to their driveway. Can be used for Corvette, Porsche, campers, and more.
Please Check BRIDJIT Compatibility Criteria before ordering. This curb ramp is made for a very specific type of curb. See the Compatibility Criteria image. Will BRIDJIT Fit My Curb?
1. Measure 20” out from top edge of curb out into the street.
2. Measure from the lowest point of the gutter, perpendicular to the first measurement. This distance should be between: 1.75” TO 3”.


These curb ramps are not bolted down to the storm gutter, just bolted together, forming a 150lb. to 200lb mass, (depending on the number of sections used).

Benefits:

For vehicles who's front bumper is too low to clear the curb from the street to their home and driveway. Can be used for Corvette's, Porsche's, camper's, and more.

Bridjit Curb Ramps are designed to reduce the impact of a rolled curb entry by as much as 80% and can be used for protect the undercarriage of all types of vehicles, such as cars, trucks, golf carts, motorcycles, boat trailers and can be used to facilitate the movement of wheeled carts and hand trucks.

Easily installed with only a hammer and screwdriver; Bolt together with pre-inserted galvanized bolts to connect the sections, not to the ground.

Neighborhood friendly, Bridjit has a built-in full length waterway allowing normal drainage. The angled ends guide excessive water flows out and around the ramp, assisting in the elimination of debris.

Rubber from recycled tires makes this curb ramp resistant to weather and street sweepers, and allows parallel-parking.

Galvanized bolts measure 1/2 x 7-1/2-inch and are pre-inserted into the center sections.

Each section weighs 50 pounds and measures 2-1/2 x 48 x 16 inches (H x W x D). The 2-1/2" height at the center tapers to 3/4-inch at the top and bottom of the ramp.

A 2-1/2-inch wide channel on the underside of each section allows water to flow under the ramp, accommodating storm runoff and tapered ends help prevent the buildup of debris.

Bridjit Curb Ramp is Eco friendly – The average American contributes 4 tires every year to our landfills. Each BRIDJIT rubber curb ramp set uses 12 passenger tires, thus helping to reduce the number of scrap tires in landfills, making it the Green solution to your jarring curb problem.

100% made in the USA.

bridjit, low profile car ramps, Corvette ramps, car ramp extenders for low profile cars, low profile car ramps near me, low profile car ramps for corvette, bridjit curb ramp, bridjit coupon, curb ramp for driveway, driveway ramps on sale , car ramps for porsche, portable curb ramps for cars, curb ramp for campers