Call for freight pricing 239-357-1853 Craig.
Silverwing Agriculture Sprayer 90 ft. boom 1250 & 1500 Gallon.
Silverwing Model shown with all options.
$41,950 SW-1250-80MODEL: 1250 gallon trailer with 80 ft. boom, Raven 450 controller plumbing and cables (except control counsel box and GPS sensor – see Options below), Hypro 9306C-HM1C-BU centrifugal pump.
$42,790 SW-1250-90MODEL: 1250 gallon trailer with 90 ft. boom, Raven 450 controller plumbing and cables (except control counsel box and GPS sensor – see Options below), Hypro 9306C-HM1C-BU centrifugal pump.
$43,640 SW-1500-90MODEL: 1500 gallon trailer with 90 ft. boom, Raven 450 controller plumbing and cables (except control counsel box and GPS sensor – see Options below), Hypro 930^C-HM1C-BU centrifugal pump.
OPTIONS FOR SILVERWING TRAILERS:
$1,650 Any model, Raven 063-0171-220 450 control counsel.
$370 Any model, Raven GPS Sensor.
$895 Any model, Chemix kit.
SILVERWING AG TRAILER:
SW-1500-90 (1500 gallon with 90 ft. boom)
SW-1250-90 (1250 gallon with 90 ft. boom)
TRACTOR REQUIREMENT: 125 hp minimum.
TRANSPORT HEIGHT: 12 ft 6"
TRANSPORT WIDTH: 11 ft.LENGTH: 25 ft.
TANK SIZE(S): 1500 gallon & 1250 gallon (1000 gallon next season)
TANK TYPE: Tank bottom is sloped and box sump, narrow tank for 60” tire spacing. Full length sump drainage sloped with box sump.
TANK SUPPORT: Hoops and baffles
AGITATION: Dual eductor nozzles provide 5:1 mix ratio, 12 gpm.
TANK BAFFLES: Dual baffles.
LID SIZE & TYPE: 16 inch.
TANK RINSE SYSTEM: 80 gallon rinse tank, dual rinse balls, one valve to switch from spray tank to rinse tank.
FILLING: 2” inch bottom fill primed pump and fills main tank or rinse tank.
ELECTRONIC BATCH FILL METER: Optional.
PERSONAL FRESH WATER TANK: 5 gallon.
UNIT FINISH: Boom wings galvanized, trailer painted.
EMPTY WEIGHT:TONGUE WEIGHT: 4000 – 5000 lb. axle is adjustable fore/aft.
CROP CLEARANCE TO BOTTOM OF AXLE TUBE: 320/90/1246 wheel = 32"; 380/90R46 wheel= 36"
HITCH: Cat. 3, 1 ¼" pin combination pintle/clevis. Hitch height adjustable 18"-26"
HITCH TO AXLE DIMENSION: Adjustable 14 ½ - 16 ½
HITCH PIN SIZE REQUIREMENT: 1 ¼"
WHEELS/TIRES:
1250 gallon 320/90R46
1500 gallon 380/90R46
GROUND PRESSURE: 33-36 psi.
FOOTPRINT LENGTH: 320/90R46 520 sq. in380/90R46 620 sq. in
SPINDLE SIZE: 3.5 inch.
HUB RATING: 15,000 lb.
TREAD WIDTH (ROW CROP TIRE): 60"-120" infinitely adjustable. Axle is factory set at 120" wheel spacing. Customer can go into 60" but unit leaves the factory at 120" wheel spacing.
PUMP: Hypro 9306C-HM1C-BU flanged with life guard seal.115 gpm @ 100 psi max.; 207 gpm @ 30 psi max.
HYDRAULIC REQUIREMENT: 12 gpm.
PLUMBING TYPE: Banjo flange 200 & 220 (2"/2 ½").
SYSTEM FILTER: Banjo 2”"full port with 50 mesh screen. No need to remove screen, cleaned with pump pressure
BOOM SHUT OFF VALVES: TeeJet Flo-Bak automatically returns excess flow back to tank.
MAXIMUM APPLICATION RATE: 0 GPM – 85 GPM with standard plumbing.
RATE CONTROL METHOD: Broyhill – Raven – TeeJet.
BOOM TYPE & CONSTRUCTION: Suspension boom with self leveling center section. Laser cut sheet metal, unitary construction, galvanized wings.
BOOM SUSPENSION: 7 accumulators, 1 on tower, left tilt, right tilt, 2 on front fold.
BOOM WIDTH (UNFOLDED): 80/90 foot.
FOLDING METHOD: Hydraulic controls from the cab.
HYDRAULIC CONTROLS: 7 function "live"
BOOM HEIGHT: 24" – 67"
BOOM PLUMBING: 50 – TeeJet QJ363A-3/4-NYB split eyelet nozzles – holds 3 different tips per nozzle body (less tips)
CHEMICAL INDUCTION: 10 gallon (will load ammonium sulfur)
Agitation.
Axle adjustable fore and aft. 60" x 120" Spacing.
1250 gal. - 320/90 R-46
1500 gal. - 380/90 R-46
Total hydraulic boom suspension with 7 accumulators.7 function "live" fold.
Hot dip galvanized boom wings and steps & ladder.
Chemix handles all chemicals and dry ammonium sulfate.
Pump swings down for easy service of components. Agitation adjustable from the cab.
Spray tips are protected inside boom frame.
Chem Iductor standard.
Rinse System standard.
Rinse tank 80 gallon.
Freshwater Tank 5 gallon.
Silverwing Agriculture Sprayer 90 ft. boom 1250 & 1500 Gallon.
Silverwing Model shown with all options.
$41,950 SW-1250-80MODEL: 1250 gallon trailer with 80 ft. boom, Raven 450 controller plumbing and cables (except control counsel box and GPS sensor – see Options below), Hypro 9306C-HM1C-BU centrifugal pump.
$42,790 SW-1250-90MODEL: 1250 gallon trailer with 90 ft. boom, Raven 450 controller plumbing and cables (except control counsel box and GPS sensor – see Options below), Hypro 9306C-HM1C-BU centrifugal pump.
$43,640 SW-1500-90MODEL: 1500 gallon trailer with 90 ft. boom, Raven 450 controller plumbing and cables (except control counsel box and GPS sensor – see Options below), Hypro 930^C-HM1C-BU centrifugal pump.
OPTIONS FOR SILVERWING TRAILERS:
$1,650 Any model, Raven 063-0171-220 450 control counsel.
$370 Any model, Raven GPS Sensor.
$895 Any model, Chemix kit.
SILVERWING AG TRAILER:
SW-1500-90 (1500 gallon with 90 ft. boom)
SW-1250-90 (1250 gallon with 90 ft. boom)
TRACTOR REQUIREMENT: 125 hp minimum.
TRANSPORT HEIGHT: 12 ft 6"
TRANSPORT WIDTH: 11 ft.LENGTH: 25 ft.
TANK SIZE(S): 1500 gallon & 1250 gallon (1000 gallon next season)
TANK TYPE: Tank bottom is sloped and box sump, narrow tank for 60” tire spacing. Full length sump drainage sloped with box sump.
TANK SUPPORT: Hoops and baffles
AGITATION: Dual eductor nozzles provide 5:1 mix ratio, 12 gpm.
TANK BAFFLES: Dual baffles.
LID SIZE & TYPE: 16 inch.
TANK RINSE SYSTEM: 80 gallon rinse tank, dual rinse balls, one valve to switch from spray tank to rinse tank.
FILLING: 2” inch bottom fill primed pump and fills main tank or rinse tank.
ELECTRONIC BATCH FILL METER: Optional.
PERSONAL FRESH WATER TANK: 5 gallon.
UNIT FINISH: Boom wings galvanized, trailer painted.
EMPTY WEIGHT:TONGUE WEIGHT: 4000 – 5000 lb. axle is adjustable fore/aft.
CROP CLEARANCE TO BOTTOM OF AXLE TUBE: 320/90/1246 wheel = 32"; 380/90R46 wheel= 36"
HITCH: Cat. 3, 1 ¼" pin combination pintle/clevis. Hitch height adjustable 18"-26"
HITCH TO AXLE DIMENSION: Adjustable 14 ½ - 16 ½
HITCH PIN SIZE REQUIREMENT: 1 ¼"
WHEELS/TIRES:
1250 gallon 320/90R46
1500 gallon 380/90R46
GROUND PRESSURE: 33-36 psi.
FOOTPRINT LENGTH: 320/90R46 520 sq. in380/90R46 620 sq. in
SPINDLE SIZE: 3.5 inch.
HUB RATING: 15,000 lb.
TREAD WIDTH (ROW CROP TIRE): 60"-120" infinitely adjustable. Axle is factory set at 120" wheel spacing. Customer can go into 60" but unit leaves the factory at 120" wheel spacing.
PUMP: Hypro 9306C-HM1C-BU flanged with life guard seal.115 gpm @ 100 psi max.; 207 gpm @ 30 psi max.
HYDRAULIC REQUIREMENT: 12 gpm.
PLUMBING TYPE: Banjo flange 200 & 220 (2"/2 ½").
SYSTEM FILTER: Banjo 2”"full port with 50 mesh screen. No need to remove screen, cleaned with pump pressure
BOOM SHUT OFF VALVES: TeeJet Flo-Bak automatically returns excess flow back to tank.
MAXIMUM APPLICATION RATE: 0 GPM – 85 GPM with standard plumbing.
RATE CONTROL METHOD: Broyhill – Raven – TeeJet.
BOOM TYPE & CONSTRUCTION: Suspension boom with self leveling center section. Laser cut sheet metal, unitary construction, galvanized wings.
BOOM SUSPENSION: 7 accumulators, 1 on tower, left tilt, right tilt, 2 on front fold.
BOOM WIDTH (UNFOLDED): 80/90 foot.
FOLDING METHOD: Hydraulic controls from the cab.
HYDRAULIC CONTROLS: 7 function "live"
BOOM HEIGHT: 24" – 67"
BOOM PLUMBING: 50 – TeeJet QJ363A-3/4-NYB split eyelet nozzles – holds 3 different tips per nozzle body (less tips)
CHEMICAL INDUCTION: 10 gallon (will load ammonium sulfur)
Agitation.
Axle adjustable fore and aft. 60" x 120" Spacing.
1250 gal. - 320/90 R-46
1500 gal. - 380/90 R-46
Total hydraulic boom suspension with 7 accumulators.7 function "live" fold.
Hot dip galvanized boom wings and steps & ladder.
Chemix handles all chemicals and dry ammonium sulfate.
Pump swings down for easy service of components. Agitation adjustable from the cab.
Spray tips are protected inside boom frame.
Chem Iductor standard.
Rinse System standard.
Rinse tank 80 gallon.
Freshwater Tank 5 gallon.
- Brand Broyhill
- Mfg Part # SW-1250-80MODEL
Payment Methods
Shipping
UPS, see description.
Return/Exchange Policy
Return Policy.
A Return Goods Authorization (RGA) number must be obtained from customer service (1-239-357-1853). Products must be unused and in their original cartons. No discontinued or obsolete items will be accepted. For safety reasons, no returns can be accepted on HEPA items. Customer pays return freight charges and 15% restocking fee, except when return is due to freight damage. We reserves the right to refuse any return not in compliance with the above.
Please Login or Register first before asking a question.
