OWON HDS1022M-N HANDHELD DIGITAL OSCILLOSCOPE - 2 CHANNEL - 20MHZ

OWON HDS1022M-N Handheld Digital Oscilloscope - 2 Channel

Overview:

+ 2 in 1 (DSO + Multimeter)

+ Auto-scale function

+ FFT function

+ 20 group automatic measurement options

+ Bandwidth : 20MHz

+ USB data transmission supported

+ Rechargeable Li-ion battery

+ Waveform record andreplay

+ Multimeter newly supported SCPI


OWON Oscilloscope Specifications:

Model - HDS1021M-N

Bandwidth - 20MHz

Sample Rate (real time ) - 100MS/s

Horizontal Scale (s/div) - 5ns/div～100s/div, step by 1～2.5～5

Rise Time (at input, typical) - ≤ 17.5ns

Display - 3.7 inch color display with TFT panel (640 × 480 pixels, 65535 colors)

Channel - Single

Input Impedance - 1MΩ ± 2%, in parallel with 20pF ± 5pF

Record Length - max 6K points on each channel

Interpolation - sin (x) / x

Probe Attenuation Factor - 1X，10X，100X，1000X

Input Coupling - DC, AC, and GND

DC Accuracy (average) - average >16 : ±(5% reading + 0.05div) for △V

Vertical Sensitivity - 5mV/div～5V/div (at input)

Vertical Resolution (A/D) - 8 bits (2 channels simultaneously )

Max Input Voltage - 400V (PK - PK) (DC + AC, PK - PK, 1MΩ input impedance, probe attenuation 10 : 1), CAT II

Trigger Type - Edge, Video, Alternate

Trigger Mode Auto, Normal, Single

Trigger Level - ±6 divisions from screen center

Acquisition Mode - Sample, Peak Detect, and Average

DC Gain Accuracy - ±3%

Automatic Measurement:

Vpp, Vavg, Vrms, Freq ,Period, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot,

Pre-shoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay A→B , Delay A→B

Waveform Math - ＋, －, ×, ÷, invert, FFT

Waveform Storage - 4 waveforms

Lissajous Figure:

Bandwidth - full bandwidth

Phase Difference - ±3 degrees

Communication Interface - USB

Power Supply - 100V-240V AC, 50/60Hz

Li-ion Battery - 7.4V, 6 hours operation

Dimensions (W × H × D) - 180 × 115 × 40 (mm)

Weight (without package) - 645 g

OWON Oscilloscope Multimeter Specifications:

Full Scale Reading - 3 3/4 digit (max 4000-count) / diode - 0V-1.5V

Input Impedance - 10 MΩ On / Off Test - < 50 (± 30) beeping

Voltage:

- VDC : 400mV, 4V, 40V, 400V, 1000V : ±(1% ± 1 digit); max input : DC 1000V

- VAC : 4V, 40V, 400V : ±(1% ± 3 digits), 750V : ±(2% ± 3 digits); Frequency : 40Hz - 400Hz;

max input : AC 750V (virtual value)

Current:

- DC : 40mA, 400mA : ±(1.5% ± 1 digit), 20A : ±(3% ± 3 digits)

- AC : 40mA : ±(1.5% ± 3 digits), 400mA : ±(2% ± 1 digit), 20A : ±(5% ± 3 digits)

Impedance - 400Ω : ±(1% ± 3 digits), 40ΚΩ - 4ΜΩ : ±(1% ± 1 digit), 40MΩ : ±(1.5% ± 3 digits)

Capacitance - 51.2nF - 100uF : ±(3% ± 3 digits)

Accessories Included:

- Power Cord, CD Rom, USB Probe, Probe Adjust, Multimeter Lead, Adapter, 5V / 1KHz Output, Manual, Capacitance Ext Module, Soft Bag.