On Hold WALTCO Truck Lift Gate parts lot 85803129 with diagram literature drawings.

These parts came in a plain box that was falling apart. Drawings also in box. Drawings are not the best but legible. Box has these parts with two drawings. One drawing has part numbers and one looks like assembly diagram.
A) Large Pin 1 1/4" X 10 3/4" part# 85803129 with grease fitting.
B) Smaller pin with 2 roll pins has washer welded on one end. Pin is 4 5/8" X 1"
PART# 521502 5758-004,756 STA401.
C) Steel Box approx. 3 1/2" X 4" X 1" No numbers. Has bolt through center box with bolt head welded.
D) Smaller steel plate with a nut welded on.
E) Two steel plates have 2 bolt holes and a 1" hole in each plate.
F) Threaded plug 1" diameter is also drilled and tapped for pipe fitting.
G) 2 small plates, thin gauge with tags on one end.
H) 1 new 3-pole switch, up & down, spring return to center.
I) 1 used 6-pole switch, up & down, spring return to center.


BEWARE: The only part I can find in the drawings is the large pin. I think some drawings are missing too.
WALTCO has a factory near by in Tallmadge, Ohio.