OWON HDS1022M-I Handheld Digital Oscilloscope with Channel Isolation - 2 Channel
Overview:
+ 2 in 1 (DSO + Multimeter)
+ with good ISOLATION between channels
+ Auto-scale function
+ FFT function
+ 20 group automatic measurement options
+ Bandwidth : 20MHz
+ USB data transmission supported
+ Rechargeable Li-ion battery
+ Multimeter newly supported SCPI
OWON Oscilloscope Specifications:
Model - HDS1022M-I
Bandwidth - 20MHz
Sample Rate - 100MS/s
Rise Time (at input, typical) - ≤17.5ns
Record Length - 6K points
Channel - dual, insulated ground of 1000 : 1
Display - 3.7'' color TFT LCD, 640 x 480 pixels
Floating Meas. Channel - insulated input ground between multimeter / oscilloscope mode
Input Coupling - DC, AC, and GND
Input Impedance - 1MΩ±2%, in parallel connection with 15pF± 5pF
Horizontal Scale (s/div) - 5ns/div - 100s/div, step by 1 - 2 - 5
Interval (△T) Accuracy
- single: ±(1 interval time + 100ppm x reading + 0.6ns),
- average>16: ±(1 interval time + 100ppm x reading + 0.4ns)
Vertical Sensitivity - 5mV/div - 5V/div (at input )
Vertical Resolution - 8 bits
Max Input Voltage - 400V (DC + AC / PK - PK, 1MΩ input impedance, probe attenuation in 10 : 1)
Trigger Type
Edge - rising edge, falling edge
Video - line, field, random line, odd / even fields
Alternate
Trigger Mode - Auto, Normal, and Single
Automatic Measurement
Vpp, Vavg, Vrms, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot, Freq, Period,
Rise Time, Fall Time, Delay A→B↑ , Delay A→B↓ , +Width, -Width, +Duty, -Duty
DC Accuracy (average) - average>16: ±(5% reading 0.05 div) for △V
Waveform Math - +, -, *, / , FFT, invert
Waveform Storage - 4 waveforms
Lissajous Figure
Bandwidth - full bandwidth
Phase Difference - ±3 degrees
Cursor Measurement - △V, and △T between cursors
Communication Interface - USB host, and USB device
Battery - built-in Li-ion battery, 7.4V / 3500mAh
Dimension (W / H / D) - 180 x 113 x 40 mm
Weight - 645 g
OWON Oscilloscope Multimeter Specifications:
Full Scale Reading - 3 3/4 digit (max 4000-count) / Diode 0V - 1.5V
Input Impedance - 10 MΩ / On / Off Test - < 50 (± 30) beeping
Voltage
VDC : 400mV, 4V, 400V : ±(1% ± 1 digit); max input : DC 400V
VAC : 4V, 40V, 400V : ±(1% ± 3 digits), Frequency : 40Hz - 400Hz;
max input : AC 750V (virtual value)
Current
DCA: 40mA, 400mA: ±(1.5% ±1 digit), 10A: ±(3% ± 3 digits)
ACA: 40mA: ±(1.5% ± 3 digit); 400mA: ±(2 ± 1 digit); 10A: ±(3% ± 3 digits)
Impedance
400Ω: ±(1% ± 3 digits); 4KΩ / 40KΩ / 400 KΩ / 4MΩ: ±(1% ± 1 digit); 40MΩ: ±(1.50%
± 3 digits)
Capacitance 51.2nF - 100uF : ±(3% ± 3 digits)
Accessories Included: Power Cord CD Rom USB Cable Probe Probe Adjust Multimeter Lead, Adapter 5V, 1KHz Output, Manual Capacitance Ext Module, Soft Bag
Overview:
+ 2 in 1 (DSO + Multimeter)
+ with good ISOLATION between channels
+ Auto-scale function
+ FFT function
+ 20 group automatic measurement options
+ Bandwidth : 20MHz
+ USB data transmission supported
+ Rechargeable Li-ion battery
+ Multimeter newly supported SCPI
OWON Oscilloscope Specifications:
Model - HDS1022M-I
Bandwidth - 20MHz
Sample Rate - 100MS/s
Rise Time (at input, typical) - ≤17.5ns
Record Length - 6K points
Channel - dual, insulated ground of 1000 : 1
Display - 3.7'' color TFT LCD, 640 x 480 pixels
Floating Meas. Channel - insulated input ground between multimeter / oscilloscope mode
Input Coupling - DC, AC, and GND
Input Impedance - 1MΩ±2%, in parallel connection with 15pF± 5pF
Horizontal Scale (s/div) - 5ns/div - 100s/div, step by 1 - 2 - 5
Interval (△T) Accuracy
- single: ±(1 interval time + 100ppm x reading + 0.6ns),
- average>16: ±(1 interval time + 100ppm x reading + 0.4ns)
Vertical Sensitivity - 5mV/div - 5V/div (at input )
Vertical Resolution - 8 bits
Max Input Voltage - 400V (DC + AC / PK - PK, 1MΩ input impedance, probe attenuation in 10 : 1)
Trigger Type
Edge - rising edge, falling edge
Video - line, field, random line, odd / even fields
Alternate
Trigger Mode - Auto, Normal, and Single
Automatic Measurement
Vpp, Vavg, Vrms, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot, Freq, Period,
Rise Time, Fall Time, Delay A→B↑ , Delay A→B↓ , +Width, -Width, +Duty, -Duty
DC Accuracy (average) - average>16: ±(5% reading 0.05 div) for △V
Waveform Math - +, -, *, / , FFT, invert
Waveform Storage - 4 waveforms
Lissajous Figure
Bandwidth - full bandwidth
Phase Difference - ±3 degrees
Cursor Measurement - △V, and △T between cursors
Communication Interface - USB host, and USB device
Battery - built-in Li-ion battery, 7.4V / 3500mAh
Dimension (W / H / D) - 180 x 113 x 40 mm
Weight - 645 g
OWON Oscilloscope Multimeter Specifications:
Full Scale Reading - 3 3/4 digit (max 4000-count) / Diode 0V - 1.5V
Input Impedance - 10 MΩ / On / Off Test - < 50 (± 30) beeping
Voltage
VDC : 400mV, 4V, 400V : ±(1% ± 1 digit); max input : DC 400V
VAC : 4V, 40V, 400V : ±(1% ± 3 digits), Frequency : 40Hz - 400Hz;
max input : AC 750V (virtual value)
Current
DCA: 40mA, 400mA: ±(1.5% ±1 digit), 10A: ±(3% ± 3 digits)
ACA: 40mA: ±(1.5% ± 3 digit); 400mA: ±(2 ± 1 digit); 10A: ±(3% ± 3 digits)
Impedance
400Ω: ±(1% ± 3 digits); 4KΩ / 40KΩ / 400 KΩ / 4MΩ: ±(1% ± 1 digit); 40MΩ: ±(1.50%
± 3 digits)
Capacitance 51.2nF - 100uF : ±(3% ± 3 digits)
Accessories Included: Power Cord CD Rom USB Cable Probe Probe Adjust Multimeter Lead, Adapter 5V, 1KHz Output, Manual Capacitance Ext Module, Soft Bag
- Brand OWON
- Mfg Part # HDS1022M-I
Payment Methods
Shipping
UPS, FREE Shipping
Please Login or Register first before asking a question.