OWON MSO MSO7102TD 100MHz Mixed Signal Oscilloscope w/Logic Analyzer
•2 in 1 ( DSO+LA )
•8" inch LCD color display
•Support USB for data transmission to PC
•USB Flash Disk Storage
•20 Automatic Measurements
•Digital Storage Oscilloscope
•100 MHz bandwidth
•Max up to 2 GS/s sample rate
•Auto-scale
•FFT
•Logic Analyzer
•100MHz bandwidth
•Max up to 1 GS/s sample rate
•16 input channels
Specifications:
Bandwidth - 100 MHz
Sample rate (Real time) - 1 GS/s (500 MS/s for dual channels)
Horizontal Scale (S/div) - 2ns/div-100s/div step by 1-2-5
Rise time - ≤3.5ns
Display - 8.0'' color LCD, TFT Screen, 640x480 pixels, 65535 colors
Input impedance - 1MOmega +/- 2% in parallel with 15pF+/-5pF
DC accuracy (Average) - Average>16:±(3%reading+0.05div) for deltaV
Vertical Sensitivity - 2mV/div -10V/div
DC Gain Accuracy - ±3%
Vertical resolution (A/D) - 8 bits (2 channels simultaneously)
Channels - Dual channels + external trigger
Acquisition mode - Normal, Peak Detect, Average
Record length - Max.2M points
Waveform storage - 4 waveforms
Interpolation - (sin x)/x
Max. Input Voltage - 400V (DC + AC PK-PK )
Probe attenuation factor - 1X, 10X, 100X, 1000X
Trigger Mode - Edge, Video, Alternate, Pulse, Slope
Automatic Measurement - Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Preshoot, Risetime, Falltime,+Width, -Width, +Duty, -Duty, Delay A-B, Delay A-B
Waveform math - +, -, x, /, FFT
Power supply - 100-240V ACRMS, 50Hz/60Hz, CAT II
Lissajou’s figure Bandwidth - 100MHz
Phase difference - ±3 degrees
Communication interface - USB, Support USB Flash Disk Storage
Fuse - 1A, T grade, 250V
Cymometer - Available
Power Supply - 110V-240V ACRMS, 50/60Hz, CAT II
Logic Analyzer Characteristics
Sample rate (real time) - 20S/s to approximately 1 GS/s
Bandwidth - 100 MHz
Channels - 16
Record length - Max 4M/channel
Input impedance - 660K Omega ±5% // 15±5pF
Trigger mode - Edge trigger, Bus trigger, Pattern Trigger, Sequential queue trigger, State trigger, Data alignment trigger, Data width trigger,
Distributed queue trigger
Trigger position setting - Pre-trigger, mid-trigger, re-trigger
Threshold Voltage - ±6V (4 settings)
Input Signal Range - ±30V
Data search - Available
Data System - Binary system, Decimal system, Hex
Digital filter - 0, 1, 2 optional
Setting storage - 10 settings
•2 in 1 ( DSO+LA )
•8" inch LCD color display
•Support USB for data transmission to PC
•USB Flash Disk Storage
•20 Automatic Measurements
•Digital Storage Oscilloscope
•100 MHz bandwidth
•Max up to 2 GS/s sample rate
•Auto-scale
•FFT
•Logic Analyzer
•100MHz bandwidth
•Max up to 1 GS/s sample rate
•16 input channels
Specifications:
Bandwidth - 100 MHz
Sample rate (Real time) - 1 GS/s (500 MS/s for dual channels)
Horizontal Scale (S/div) - 2ns/div-100s/div step by 1-2-5
Rise time - ≤3.5ns
Display - 8.0'' color LCD, TFT Screen, 640x480 pixels, 65535 colors
Input impedance - 1MOmega +/- 2% in parallel with 15pF+/-5pF
DC accuracy (Average) - Average>16:±(3%reading+0.05div) for deltaV
Vertical Sensitivity - 2mV/div -10V/div
DC Gain Accuracy - ±3%
Vertical resolution (A/D) - 8 bits (2 channels simultaneously)
Channels - Dual channels + external trigger
Acquisition mode - Normal, Peak Detect, Average
Record length - Max.2M points
Waveform storage - 4 waveforms
Interpolation - (sin x)/x
Max. Input Voltage - 400V (DC + AC PK-PK )
Probe attenuation factor - 1X, 10X, 100X, 1000X
Trigger Mode - Edge, Video, Alternate, Pulse, Slope
Automatic Measurement - Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Preshoot, Risetime, Falltime,+Width, -Width, +Duty, -Duty, Delay A-B, Delay A-B
Waveform math - +, -, x, /, FFT
Power supply - 100-240V ACRMS, 50Hz/60Hz, CAT II
Lissajou’s figure Bandwidth - 100MHz
Phase difference - ±3 degrees
Communication interface - USB, Support USB Flash Disk Storage
Fuse - 1A, T grade, 250V
Cymometer - Available
Power Supply - 110V-240V ACRMS, 50/60Hz, CAT II
Logic Analyzer Characteristics
Sample rate (real time) - 20S/s to approximately 1 GS/s
Bandwidth - 100 MHz
Channels - 16
Record length - Max 4M/channel
Input impedance - 660K Omega ±5% // 15±5pF
Trigger mode - Edge trigger, Bus trigger, Pattern Trigger, Sequential queue trigger, State trigger, Data alignment trigger, Data width trigger,
Distributed queue trigger
Trigger position setting - Pre-trigger, mid-trigger, re-trigger
Threshold Voltage - ±6V (4 settings)
Input Signal Range - ±30V
Data search - Available
Data System - Binary system, Decimal system, Hex
Digital filter - 0, 1, 2 optional
Setting storage - 10 settings
- Brand OWON
- Mfg Part # MSO7102TD
Payment Methods
Shipping
UPS, FREE Shipping
Please Login or Register first before asking a question.
