KNIGHT CUBE Bicycle Cycling Electricity Generator Mobile Power Supply Torch

Check more details on youtube
https://www.youtube.com/watch?v=nrN9Rz4O8Vk

KNIGHT CUBE, a cycling electricity generating mobile device specially designed and developed for cyclists, is able to generate continuous electricity power in cycling trips, charge all kinds of digital products and light up your way ahead all along. It is easy to assemble and disassemble and can serve as your spare power supply in daily life. It is definitely your best partner in travel.
*Record every beautiful moment
*Remember each trip and sail on
*Remain connected and never blackout


There are too many brands and models of bicycles available on the market. Therefor, it is difficult to list all matching models.

Below is the fitting criterion to decide whether KNIGHT CUBE is mountable or not.
1, The distance between the front fork and the hub must be no less than 10mm.
2, The diameter of the hub must be no more than 36mm
3, Confirm the diameter of the spindle is 15 mm or 19mm.
As long as these three conditions are satisfied. KNIGHT CUBE can be mounted to the bicycle.


Package includes: Generator K1, Host C1, Connecting Wire, Holder, 16 Spare Parts, Information Guide.




Product Features:
1. Three-in-one function, generator + mobile power supply + high-brightness LED torch.
2. Super-low cycling resistance. No obvious resistance will be produced in cycling after the product is mounted to the bicycle.
3. It is easy and quick to mount the product to most brands of bicycles on the market, without affecting bicycles’ original structure or increasing wearing.
4. High-efficiency input conversion. Make sure high-efficiency power conversion (85% - 90%) from cycling to battery at different speeds.
5. Intelligent detection of output port load. When the output port is unplugged for 25 seconds, it will go into standby mode automatically, boasting extra-low standby power consumption (≤10uA). When it is plugged, press the switch to start USB output. Thanks to the auto detection mode, no extra electricity will be wasted.
6. High-efficiency permanent magnet brushless generator with a rated power of 10W.
7. The main body of the mobile power supply can be disassembled and used as domestic mobile power supply independently and also as high-brightness LED torch, capable of lighting continuously for 6 hours under high brightness mode.
8. Waterproof of the mobile power supply is graded IPX6. The LED torch can function normally in the rain as long as the rubber plug in the output interface is well covered in cycling.
9. The case is made of highly weather-proof material and the generator is equipped with stainless steel bearings. They are moisture-proof and anti-rust, ensuring sufficiently long service life for outdoor use.
10. When you are riding at a low speed of 5km/h, the generator will start to produce electric power and charge.
11. When traveling light, riding at a speed of 10km/h will generate about 300-800mA electric power.
12. When traveling with a cycling team, riding at a speed of 15-20km/h will generate about 800-1200mA electric power.
13. When exercising to increase vital capacity, riding at a speed of 20-30km/h or above will generate about 1200-1400mA electric power.
14. Built-in battery capacity: 4500mAH. When cycling at a speed of 15-25km/h, the charging time is 3 to 5 hours.
15. Duplex charging inputs: 4-18V three-phase alternating current supply (Mini generator); micro USB 5V power supply.
16. Output interface: Standard USB port; 5V1A (maximum 1.5A).