Lerdge Dual Extruder Module 2 in 1 Out/2 in2 Out Module For 3D Printer LERDGE-S Board

Electronics > 3D Printer & Supplies
Add to Cart
  • Description
  • Payments, Shipping & Policies
  • Contact seller

Lerdge Dual Extruder Module 2 in 1 Out/2 in2 Out Module For 3D Printer LERDGE-S Board


Available options:
**NOTE: Please let us know which option you want to receive via the message on checkout step (if there are multi options)

Note:
This module can ONLY be used in LERDGE-S Board.
 
Product Description:
 
The dual extruder module for Lerdge board can achieve two-color printing, Please directly insert the module into the motherboard extension interfaces and then restart, the system will identify the double-headed mode according to the components on the module.
 
Tips:
If you are new for using the dual extruder, we suggest to use 2 in 1 out hotend, (There are also some hotends using 2 in 1 out for dual color switching print). 2 in 2 out has higher requirements in mechanical part, which is more difficult to adjust.

2 in 2 out mode
When the Lerdge motherboard power on with the dual extruder module plugged in, the system can successfully read the effective temperature of the second hotend, and the main UI will first show the second hotend information.
 
Enter the "Model Settings" -> a specific "model" -> "Advanced Settings" -> "Hotend 2 setting", measure and set up the offset position for Hotend 2 in the X, Y axis and Hotend 1. The positive and negative of the offset are determined by the specific coordinate system of the machine.
 
Go to "Motor Settings" and "Step Value Settings" to modify the step value of the Hotend 2 extruder motor.
Enter the "Motor setting" "Motor direction setting" to modify the direction of the Hotend 2 extruder motor.

2 in 1 out mode
Go to "Motor Settings" and "Step Value Settings" to modify the step value of the Hotend 2 extruder motor.
Enter the "Motor setting" "Motor direction setting" to modify the direction of the Hotend 2 extruder motor.

Package Included:

1x D
ual extruder module
(the driver and heatsink is not included)

 

 
H2 Sensor: Connect the second hotend sensor(thermistor)
Hotend2: Connect the second hotend heater
E2 motor: Connect the second extruder stepper motor
Fan1: Connect the second hotend throat cooling fan (the fan starts working when the second hotend is heated or the temperature is above 40 degrees Celsius)
Fan2: second hotend model cooling fan
A: laser expansion interface (software is not yet open)
B: laser expansion interface (software is not yet open)
+ RGB: color light bar interface (software is not yet open)









    • Brand TechDaddy
    • Mfg Part # TDBG1320714
Payment Methods
Shipping USPS, $1.99
Shipping Policy

We will arrange shipping for you within 3 days after payment cleared except the holidays.
- Estimated delivery time from date of shipment is 12-21 working days from our warehouse in China, over 80% of our customers receive the products within 20 working days (please note that these are estimates; post office and customs delays can occur, if so, please check the information at your local post office, if you still can not get the package, please contact us.
-We ship items to Worldwide.

Return/Exchange Policy

We accept return in 30 days

Other Policies

CONTACT US

If you send email to us, In our working hours will be resumed within 24 hours.
If you we are not satisfied with the product or service, please contact me and don't give us negative or natural feedback. We must give you a satisfactory solution. Thank you!

Please Login or Register first before asking a question.
More from TechDaddy's Store

1.75mm Filament Mate...
$5.03

Lerdge X Integrated ...
$101.23

1.75mm V5 Upgraded R...
$10.35

3 inch Stainless Ste...
$7.17

JGAURORA 200mNm Min ...
$15.81

3D Printer DIY Kit M...
$95.50

CTC MK8 0.4 mm Extru...
$2.87

JGAURORA M6 1.75mm F...
$5.17

Full Metal Remote Ex...
$18.43

TEVO Dual Extruder U...
$100.93

M6X30 1.75mm Nozzle ...
$1.63

5 Meter 1.75MM PLA 3...
$2.98