Combo Ermator S26 Dust Extractor & Ermator C3000 Pre-Separator.
S26 Single-Phase HEPA Dust Extractor- 120V.
Unlike low cost homeowner vacuums, Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the most dangerous to breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site. They can also be connected to electrical power tools to extract the freshly cut and friable concrete dust, considered to be the most hazardous to construction workers. It’s time for you to stop using an ordinary vacuum and step up to the innovation, performance and the power of a Ermator HEPA Dust Extractor.
The S26 is a powerful dust separator suitable for applications involving fine dust. It can handle building, grinding, plaster and concrete dust. It is equipped with a fine filter (flush able) and an H13 filter which meets the asbestos requirements. An hour counter and vacuum meter for filter control are standard.
Like all Ermator Dust Extractors, model S26 is equipped with Jet Pulse filter cleaning, “drop down” dust collection in Longopac® 20 m plastic bags, and tested and certified HEPA filters. The wheels are of the “non marking type”, puncture free and lockable at the front. It is supplied complete with cleaning equipment and transport protection.
2 HEPA filters 18 (ft2), 99.99% at 0.3 microns.
An hour counter and vacuum meter for filter control are supplied as standard.
Collection in Logopac (20 m plastic bag).
Efficient air pulse cleaning.
Non-marking wheels, puncture free and lockable at the front.
Supplied fitted and complete with cleaning equipment and transport protection.
Weight: 103 lbs.
Warranty: 36 month.
SINGLE-PHASE DUST EXTRACTORS:
Ermator's single phase HEPA dust collectors are powerful, portable vac/separators that can be used alone for wide variety of pick-up applications, and to supplement hand/floor power tools for dustless grinding, sanding and drilling. Excellent for both wood and concrete dust and other construction, restoration materials where fast, dustless recovery is required to maintain productivity and clean-air working environment. All units include individually tested and certified HEPA filters and Ermator's unique direct "dustless" deposit into poly bags for safe, easy handling and disposal. Equipped with "Jet Pulse" filter cleaning system for maximizing airflow and pick-up efficiency.
Tool Kit includes:
2" Hose Assembly (17' long)
2-Piece Wand (2"x 5')
Floor Tool (2"x 14.5')
YouTube Video: http://youtu.be/iZ7Li9F-heU
Ermator C3000 Pre-Separator 2" Inlet - 9.77 Gallons.
Designed for S26, S36 and T4000 Dust Extractors.
When your dust collector is prematurely clogging due to large quantities of material, consider the model C3000 pre-separator. It Captures 90% of the material before it reaches the dust collector, keeping your dust collector filter clean and extending your grinding operation longer without interruption.
A 9.77 gal. pre-separator with built in vacuum equalizer for use with a plastic bag.
Includes an 8ft, 2" hose assembly.
Weight: 49 lbs.
Volume: 9.77 gal.
Size: 25" x 22" x 58"
Warranty: 36 month.
In grinding operations producing large amounts of dust, your dust extractor may need to be supplemented with a pre-separator. Pre-separators introduce an additional separation stage to capture as much dust as possible before it can reach the dust extractor. The benefit is increased efficiency in the separation of dust a from the air stream, improved filter performance and significant reduction in the frequency of filter maintenance. A Pre-separator also contributes to higher airflow, faster pick-up and extended motor life. You can have confidence in the level of filtration since our pre-separators are equipped with some of the same primary filters used in our dust extractors. Both models include our popular Longopac for safe containment and disposal of concrete dust and other harmful building materials such as asbestos and lead.
Payment can be also made over the phone via Visa, MasterCard, American Express or Discover by calling 239-357-1853 Craig.