Ermator S13 HEPA Dust Extractor & Ermator C1300 Pre-Separator Combo.
S13 Single-Phase HEPA Dust Extractor 120 Volt and 230 Volt.
A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site. They can also be connected to electrical power tools to extract the freshly cut and friable concrete dust, considered to be the most hazardous to construction workers. It’s time for you to stop using an ordinary vacuum and step up to the innovation, performance and the power of a Ermator HEPA Dust Extractor.
The model S13 single motor HEPA Dust Extractor can be connected to electrical, hand operated power tools to extract freshly cut, friable concrete dust. The model S13 is also an effective all around construction vacuum for picking up a wide range of building materials and debris.
Comes with 16 foot, 1.5" hose, wand and floor tool. Includes a 6 mil, 4 gallon disposable poly bag for dust free handling and disposal, or the Longopac system can be installed for quick, dust free disposal. Large non marking, puncture free rear wheels and locking front casters make the S13 very mobile.
1 HEPA filter 9 (ft2), 99.99% at 0.3 microns.
Model: 20090058A. 120V and 20090058. 230 Volt
Amps: 9.8 120V and 4.9 Amps 230V.
Weight: 66 lbs.
Volts: 120 and 230V.
Warranty: 36 month.
SINGLE-PHASE DUST EXTRACTORS:
Ermator's single phase HEPA dust collectors are powerful, portable vac/separators that can be used alone for wide variety of pick-up applications, and to supplement hand/floor power tools for dustless grinding, sanding and drilling. Excellent for both wood and concrete dust and other construction, restoration materials where fast, dustless recovery is required to maintain productivity and clean-air working environment. All units include individually tested and certified HEPA filters and Ermator's unique direct "dustless" deposit into poly bags for safe, easy handling and disposal. Equipped with "Jet Pulse" filter cleaning system for maximizing airflow and pick-up efficiency.
Ermator C1300 Pre-Separator - 8.72 Gallons.
Designed for S13 and S26 Single-Phase Dust Extractors.
When your dust collector is prematurely clogging due to large quantities of material, consider the model C1300 pre-separator. It Captures 90% of the material before it reaches the dust collector, keeping your dust collector filter clean and extending your grinding operation longer without interruption.
A 8.72 gal. pre-separator with built in vacuum equalizer for use with a plastic bag.
Includes an 8ft, 2" hose assembly.
Weight: 31 lbs.
Volume: 8.72 gal.
Collection: 11 gallon plastic bag.
Size: 16" x 19" x 33"
Warranty: 36 month.
In grinding operations producing large amounts of dust, your dust extractor may need to be supplemented with a pre-separator. Pre-separators introduce an additional separation stage to capture as much dust as possible before it can reach the dust extractor. The benefit is increased efficiency in the separation of dust a from the air stream, improved filter performance and significant reduction in the frequency of filter maintenance. A Pre-separator also contributes to higher airflow, faster pick-up and extended motor life. You can have confidence in the level of filtration since our pre-separators are equipped with some of the same primary filters used in our dust extractors. Both models include our popular Longopac for safe containment and disposal of concrete dust and other harmful building materials such as asbestos and lead.
Payment can be also made over the phone via Visa, Mastercard, American Express or Discover by calling 239-357-1853 Craig.