OWON XDS3064E N-IN-1 DIGITAL STORAGE OSCILLOSCOPE - 4 CHANNELS - 60MHZ - 1GS/S

Add to Cart
OWON XDS3064E n-in-1 Digital Storage Oscilloscope - 2 Channels - 60MHz - 1GS/s
Overview:
+ 60MHz / 100MHz Bandwidth,1GS/s sample rate
+ 8-bit, 12-bit or 14-bit high resolution ADC
+ 40M record length 45,000 wfms/s waveform refresh rate
+ low back ground noise
+8 inches 800 x 600 high resolution multi-touch screen, better operation experience
+ SCPI, and LabVIEW supported
+ multi- trigger, and bus decoding function
+ multi-interface integration - USB host, USB device, USB port for PictBridge, LAN
Xvisual - The 3G Oscilloscope Technology Platform from OWON - your powerful n-in-1 on-site measurement station
OWON Xvisual Platform Highlights:
1. 12-bit high vertical resolution model - XDS-A series product achieves 16 times resolution, and definition more than its general 8-bit counterpart, which makes it the better solution for small signal measurements, and signal detail restoration from large signals
2. Platform – fully restore waveform detail(s).
3. Multi-trigger supports - Logic, Time-out, I2C, SPI,RS232, Runt, Windows, Nth Edge, and CAN
4. Serial bus decoding available for I2C, SPI, RS232, and CAN
5. Built-in multimeter module, with auto-scale, and data logging function
6. Built-in dual-channel 25MHz / 50MHz arbitrary waveform generator module, with sample rates of 125MS/s / 250MS/s and 20mVpp signal measured by common 8-bit DSO, 10 times zoomed 20mVpp signal measured by 12-bit XDS series DSO, 10 times zoomed
7. Built-in WiFi module gives the ability to communicate with mobile devices providing remote control, together with simultaneous measurement result(s) display via app software. Waveform data-saving, checking, co-sharing is possible, along with co-analyzing 8. IPS screen exports lively waveform detail, and its multi-point touch function improves operation efficiency considerably.
9. Optional battery makes floating measurements possible, and more convenient for field use.

OWON XDS Series n-in-1 Digital Storage Oscilloscope Specifications:
Model - XDS3064E
Bandwidth - 60 MHz
Sample Rate - 1GS/s
Vertical Resolution - (A/D) 8 bits
Record Length - 40M
Waveform Refresh Rate - 45,000 wfms/s
Horizontal Scale (s/div) - 2ns/div - 1000s/div, step by 1 - 2 - 5
Rise Time - (at input, typical) ≤5.8ns
Channel - 4
Display - 8" color LCD, 800 x 600 pixels high resolution multi-touch screen
Input Impedance - 1MΩ ± 2 %, in parallel with 15pF ± 5pF
Channel Isolation - 50Hz : 100 : 1, 10MHz : 40 : 1
Max Input Voltage - 1MΩ ≤ 300Vrms
DC Gain Accuracy - ±3%
DC Accuracy average - ≥ 16 : ±(3% reading + 0.05 div) for △V
Probe Attenuation Factor - 0.001X - 1000X, step by 1 - 2 - 5
LF Respond (AC, -3dB) - ≥5Hz (at input, A C coupling, -3dB)
Sample Rate / Relay Time Accuracy - ± 1ppm
Interpolation - sin(x) / x
Interval (△T) Accuracy (full bandwidth)
· Single: ±(1 interval time + 1ppm x reading + 0.6ns);
· Average > 16 : ±(1 interval time + 1ppm x reading + 0.4ns)
Input Coupling - DC, AC, and GND
Vertical Sensitivity - 1mV/div - 10V/div (at input)
Trigger - Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, R S232, and CAN (optional)
Bus Decoding - I2C, SPI, R S232, and CAN (optional)
Trigger Mode - Auto, Normal, and Single
Vertical Range - ±2V (1mv/div - 50mv/div), ±20V (100mv/div - 1V/div), ±200V (2V/div - 10V/div)
Line / Field Frequency (video) - NTSC, PAL and SECAM standard
Cursor Measurement - △V, and △ T between cursors, △ V and △ T between cursors, auto-cursor
Automatic Measurement - Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B , Delay A→B , +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area
Waveform Math - +, -, ×, ÷, FFT
Waveform Storage - 100 waveforms
Lissajou's Figure
- Bandwidth - Full bandwidth
- Phase Difference ±3 degrees
Communication Interface - USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN
Frequency Counter - Available
Power Supply - 100 - 240 V AC, 50 / 60Hz, CAT II
Power Consumption - <15W
Fuse - 2A, T class, 250V
Battery (optional) - 3.7V, 13200 mA
Dimension (W x H x D) - 340 x 177 x 90 (mm)
Weight - 2.6 kg
Multimeter Specifications (optional):
Full Scale Reading - 3 ¾ digits (max 4000 count)
Diode - 0V - 1.5V
Input Impedance - 10MΩ
Continuity Test - <50 (±30) beeping
Capacitance - 51.2nF - 100uF: ±(3% ± 3 digits)
Voltage
· VDC : 400mV, 4V, 400V: ±(1 ± 1 digit); max input: DC 1000V
· VAC: 4V, 40V, 400V: ±(1 ± 3 digits); frequency: 40Hz - 400Hz; max input: A C 400V (virtual value)
Current
· DC: 40mA, 400mA: ±(1.5% ± 1 digit); 10A: ±(3% ± 3 digits)
· AC: 40mA: ±(1.5% ± 3 digits), 400mA: ±(2% ± 1 digit), 10A: ±(3% ± 3 digits)
Impedance - 400Ω: ±(1% ± 3 digits), 4 KΩ - 40MΩ: ±(1% ± 1 digit)
Arbitrary Waveform Generator Specifications (optional):
Max Frequency Output - 50MHz
Sample Rate - 250MS/s
Channels - 1-ch or 2-ch available
Vertical Resolution - 14 bits
Amplitude Range - 10mVpp - 6Vpp
Waveform Length - 8K
Standard Waveform - Sine, Square, Pulse, and Ramp
Built-in Waveforms - Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, and others, total 46 built-in waveforms

Accessories Included: Power Cord, CD-ROM/Manual, USB Cord, Probe, Probe Adjust

OWON XDS n-in-1 Series Oscilloscope Optional Modules & Accessories:
AV-VGA Port Module
Digital Multimeter Module
Multi-Touch Screen Module
Serial Bus Decoding Module
Trigger and Decoding Module
WiFi Connectivity Module
Battery
Soft Carrying Bag
    • Brand OWON
    • Mfg Part # XDS3064E
Payment Methods
Shipping UPS, FREE Shipping
Please Login or Register first before asking a question.
More from northtree's Store